Compaq HSZ80 manual 24Configuring Storagesets, Ibm Aix

4–24Configuring Storagesets

The following modes can be assigned:

■A—DIGITAL UNIX ® , OpenVMS, and Hewlett-Packard®HP–UX (Default)

■B—IBM AIX ®

■C—HSZ15

■D—Windows NT TM Server

■E—Silicon Graphics Inc. IRIX

■F—Sun Solaris

For more information on the modes, see “SET controller,” page 5–91.To view the host mode setting on the controller, use the following syntax:

SHOW THIS_CONTROLLER FULL

or

SHOW OTHER_CONTROLLER FULL

To set the host mode, use one of the following syntax:

SET THIS_CONTROLLER HOST_FUNCTION = (ID, MODE)

or

SET OTHER_CONTROLLER HOST_FUNCTION = (ID, MODE)

Example

In Figure 4–1,two different hosts are connected on the same SCSI host bus going into Port 1 of a shared controller. Targets 0 and 1 (units D0–D2, D100–D102) are configured in DIGITAL Open VMS mode and targets 2 and 3 (D200–D202 and D300–D302) are configured in Windows NT Server mode. Because the default host mode includes DIGITAL Open VMS in Host Mode A, all of the targets are automatically assigned to Host Mode A.