Compaq HSZ80 manual SET Thiscontroller HOSTFUNCTION= ID, Mode

2–7

6.Set the host function mode for the controller using the target ID numbers set in step 5. Use the following command:

NOTE: The default host function mode defaults to Host Mode A. The

HOST_FUNCTION switch changes the host function mode to a different mode.

SET THIS_CONTROLLER HOST_FUNCTION= (ID, MODE)

To change the host function mode, see “SET controller,” page 5–91for information on the HOST_FUNCTION switch.

7.Restart the controller using the following command:

RESTART THIS_CONTROLLER

See “RESTART controller” in Chapter 5, “CLI Commands.”

8.Set the time on the controller, which provides a baseline for replacing the external battery, using the following command:

SET THIS_CONTROLLER TIME=DD-MMM-YYYY:HH:MM:SS

NOTE: All values are numbers, except for MMM, which uses the first three letters of the month. When setting hours, minutes, and seconds—HH, MM, and SS—you must use 24-hour time.

9.Set up the battery discharge timer:

a. Start Frutil using the following command:

RUN FRUTIL

Frutil displays the following:

Do you intend to replace this controller’s cache battery? Y/N

b.Enter Y(es).

Frutil displays a three-step procedure and prompts you to press return.

c.Press return.

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide