Compaq HSZ80 manual Displaying the Status of the Save Configuration Feature, Controller

3–27

Displaying the Status of the Save Configuration

Feature

You can use the SHOW THIS_CONTROLLER FULL command to find out if the save configuration feature is active and which devices are being used to store the configuration. The display includes a line that indicates status and how many devices have copies of the configuration, as shown in the following example.

SHOW THIS_CONTROLLER FULL

Controller:

HSZ80 (C) DEC ZG07010098 SOFTWARE XXXX-0, HARDWARE 0000 NODE ID = XXXX-XXXX-XXXX-XXXX

ALLOCATION_CLASS = 0

SCSI_VERSION = SCSI-2

CONFIGURED FOR DUAL-REDUNDANCY WITH ZG06309900

IN DUAL-REDUNDANT CONFIGURATION

DEVICE PORT SCSI ADDRESS 7

TIME: NOT SET

Host port_1:

SCSI TARGET(S) (0,1)

PREFERRED TARGET(S) (0)

TRANSFER_RATE_REQUESTED = 20MHZ

HOST FUNCTIONALITY MODE FOR ID 0 = A

HOST FUNCTIONALITY MODE FOR ID 1 = D

Host port_2:

SCSI TARGET(S) (2,3)

PREFERRED TARGET(S) (3)

TRANSFER_RATE_REQUESTED = 20MHZ

HOST FUNCTIONALITY MODE = A

COMMAND CONSOLE LUN IS TARGET 2, LUN 5

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide