Compaq HSZ80 PORT1PREFERREDID PORT1TRANSFERRATEREQUESTE D, WRITEPROTECT, 5-133WRITEBACKCACHE

PORT_1_PREFERRED_ID, 5–98

PORT_1_TRANSFER_RATE_REQUESTE D, 5–100

PORT_2_ID, 5–96

PORT_2_PREFERRED_ID, 5–98

PORT_2_TRANSFER_RATE_REQUESTE D, 5–100

PROMPT, 5–98

SCSI_VERSION, 5–99TERMINAL_PARITY, 5–99TERMINAL_SPEED, 5–99TIME, 5–99TRANSFER_RATE_REQUESTED, 5–100

SET device-name, 5–102LOCAL, 5–102NOTRANSPORTABLE, 5–103REMOTE, 5–102TRANSFER_RATE_REQUESTED, 5–103TRANSPORTABLE, 5–103

SET EMU, 5–105FANSPEED, 5–106SENSOR_N_SETPOINT, 5–105

SET FAILEDSET, 5–108

AUTOSPARE, 5–108NOAUTOSPARE, 5–108

SET FAILOVER, 5–110

SET FAILOVER COPY=controller, 5–110SET mirrorset-name, 5–112

COPY, 5–112

DT_SUPPORT, 5–113

MEMBERSHIP, 5–113NODT_SUPPORT, 5–113POLICY, 5–115READ_SOURCE, 5–116REMOVE, 5–114REPLACE, 5–114

I–19

SET MULTIBUS_FAILOVER, 5–118SET NOFAILOVER, 5–120

DESTROY_UNFLUSHABLE_DATA, 5–120

NODESTROY_UNFLUSHABLE_DATA, 5–120

SET NOMULTIBUS_FAILOVER, 5–122DESTROY_UNFLUSHABLE_DATA, 5–122

NODESTROY_UNFLUSHABLE_DATA, 5–122

SET RAIDset-name, 5–124POLICY, 5–124RECONSTRUCT, 5–125REMOVE, 5–125REPLACE, 5–126

SET unit-number, 5–128DISABLE_ACCESS, 5–130ENABLE_ACCESS, 5–130ERROR_MODE, 5–132MAXIMUM_CACHED_TRANSFER, 5–131NOPREFERRED_PATH, 5–131NOREAD_CACHE, 5–132NOREADAHEAD_CACHE, 5–133NORUN, 5–133NOWRITE_PROTECT, 5–133NOWRITEBACK_CACHE, 5–134PARTITION, 5–131PREFERRED_PATH, 5–131READ_CACHE, 5–132READAHEAD_CACHE, 5–133

RUN, 5–133

WRITE_PROTECT, 5–133WRITEBACK_CACHE, 5–134

Setting

cache flush timer, 5–93CLI prompt, 5–98

control of metadata, 5–63 to 5–64

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide