Compaq HSZ80 manual Configuration Reset, 44CLI Commands

5–44CLI Commands

CONFIGURATION RESET

Erases the entire configuration on “this controller,” restores the controller’s default configuration, and shuts down the controller.

NOTE: If you plan to use this feature, SAVE_CONFIGURATION must be set when you initialize the container. See “INITIALIZE,” page 5–62.

Specify the CONFIGURATION RESET command on “this controller” in nofailover mode only. Enter this command to ensure all of the old configuration information is removed when a controller is moved from one subsystem to another.

This command disables communication between host and controller. Enter new configuration information through the SET THIS_CONTROLLER command or the CONFIGURATION RESTORE command to make the controller operational.

You can also initiate the CONFIGURATION RESET command from the controller’s operator control panel (OCP) by holding in port button 5 and pressing the reset button.

Syntax

CONFIGURATION RESET

See also

CONFIGURATION RESTORE

CONFIGURATION SAVE

INITIALIZE