Compaq HSZ80 manual Restart controller, Ignoreerrors, Noignoreerrors Default

5–83

RESTART controller

Flushes all user data from the specified controller’s write-back cache and restarts the controller.

Syntax

RESTART controller

Parameters

controller

The controller parameter indicates which controller is to be restarted. Specify OTHER_CONTROLLER or THIS_CONTROLLER.

Switches

IGNORE_ERRORS

NOIGNORE_ERRORS (Default)

Controls the reaction of the controller based on the status of write-back cache.

CAUTION: The IGNORE_ERRORS switch might cause the controller to keep unflushed data in the write-back cache until it restarts and is able to write the data to devices. Do not perform any hardware changes until the controller flushes the cache.

Specify IGNORE_ERRORS to instruct the controller to restart even if the data within write-back cache cannot be written to the devices.

Specify NOIGNORE_ERRORS to instruct the controller to not restart if the data within write-back cache cannot be written to the devices.

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide