If you need to change any jumper settings, follow these steps in the order listed here as necessary for your system:

1.Follow the instructions in “Removing the Cover,” above, to remove the computer’s cover.

2.Remove any option cards that may be blocking your access to the jumpers. See “Removing an Option Card,” on page 5-16, for instructions.

3.Then change the main system board jumper settings as necessary. See “Setting the Jumpers,” on page 5-9.

4.Replace any option cards you removed. See “Installing an Option Card,” on page 5-10.

5.Follow the instructions in “Replacing the Cover,” on page 5-34, to replace the computer’s cover.

5-8 Installing and Removing Options