2.Reset the computer and verify that OS/2 and Presentation Manager are operating properly.
3.If you are running Presentation Manager, exit from it.
4.At the OS/2 prompt, type CD\ and press Enter to change to the root directory.
5.Then type MD VGA and press Enter to create a new directory.
Note
You can also use Presentation Manager’s file Manager
feature to create the VGA directory. Follow the instructions in your OS/2 manual if you want to use Presentation Manager to create the directory.
6.Copy all the files from the DLL subdirectory on your hard disk into the VGA directory. To do this, type the following and press Enter:
7.Insert the Utility 2 diskette in drive A. This diskette includes a directory called PM which contains the following drivers for OS/2 Presentation Manager:
C! VGA480.DLL (640 x 480, 16 colors) CI VGA600.DLL (800 x 600, 16 colors).
8.Select the driver you want to use, and copy it to the VGA directory using the filename VGA.DLL. For example, if you want to use the 800 x 600,
COPY A:\PM\VGA600.DLL C:\VGA\VGA.DLL