2.Press Enter. The cursor block moves into the diskette drive submenu and you see the following:
Not installed 360 KB drive
720 KB drive (3.5")
1.2 M B d r i v e
1.44 MB drive (3.5")
You also see this message below:
Selected drive light is ON
This tells you that the light on the diskette drive currently selected is on.
3.If you want to change the drive A settings, be sure Drive A: is highlighted and press Enter. If you want to change the drive B settings, highlight Drive B : and press Enter. The cursor block moves into the submenu.
4.Use 4 or t to highlight the correct type for your diskette drive and press Enter. The screen displays the new diskette drive type you selected.
If you want to enter the type for another diskette drive, return to step 3.
5.When the diskette drive settings are correct, highlight
**SAVE SETTINGS ** and press Enter. The cursor
block returns to the main Setup menu and you see the updated information for drives A and B.
Running the Setup Program