2.To set the path for the SNOOZE utility, type the following and press Enter:

PATH C:\pathname\

For instance, if you were using the example directory described above, you would type:

PATH C:\SET\

3.Press F6 and then Enter.

See your MS-DOS Reference Manual for further information about pathnames.

Using the Utility

To activate the utility, type SNOOZE and press Enter. You see information about the SNOOZE command syntax and a status message indicating that the SNOOZE delay is set to 5 minutes.

The default period of inactivity before the screen goes blank is 5 minutes. You can specify your own time period for the SNOOZE delay by entering a number from 1 to 60 (minutes) on the SNOOZE command line.

For example to set a SNOOZE delay of 15 minutes, type the following and press Enter:

SNOOZE 15

To disable SNOOZE, type SNOOZE 0 and press Enter.

A-44 Using the VGA Utilities