The screen displays the message below:
Insert diskette for drive B: and press any key when ready
9.Remove the Utility 1 diskette, insert the formatted diskette, and press any key. The screen displays the message below:
Insert diskette for drive A: and press any key when ready
10.Continue inserting the Utility 1 diskette when the computer prompts you for the diskette for drive A and inserting the formatted diskette when the computer prompts you to insert the diskette for drive B. When all the
.SYS files are copied, the system displays the
11.Now reinstall GEM 2.2. Insert the GEM 2.2 System Master Disk in drive A, type the following, and press Enter:
SCRNSTAL C:
12.Follow the instructions in your GEM documentation and on the screen to finish the installation. You may need to insert the original GEM device driver disk as well as the GEM_DRIVRPK diskette you created.
Note
If you have installed GEM 2.2 and you want to change to the other display driver, have the GEM_DRIVRPK diskette ready, and then start from Step 11 to change the driver.
Using the VGA Utilities