WordStar, Versions 4.0 and 5.0

Your VGA adapter can run WordStar, versions 4.0 and 5.0, in 132-column text mode without a special driver. However, you need to reconfigure WordStar to use this option.

Configuring for 132 Columns

After you install WordStar on your hard disk, follow the steps below to configure the program for 132-column text mode:

1.Log onto your WordStar directory.

2.Type the following and press Enter to start WordStar’s installation program:

SSD BNL

3.The program asks for the name of your WordStar program file. If you installed WordStar without changing the program filename, this file is named WS.EXE. Type the program filename and press Enter.

4.The program then asks for the name of a program file where the changes for the new configuration are to be saved. Type the following and press Enter:

WS132.EXE

5.Select option A, Console, from the main installation menu.

6.From the console menu, select option A, Monitor.

7 . C h o o s e o p t i o n C , S c r e e n S i z i n g .

Using the VGA Utilities A-33