Installing a Hard Disk in the Vertical Position

Follow the instructions in this section to install (or reinstall) a hard disk drive in the vertical mounting position. You may need to perform the following procedures:

CI Removing the mounting frames from a new hard disk drive

CI Removing the mounting plate from the computer and connecting it to the drive

LI Installing the drive

0 Connecting the drive and power cables.

If you are installing a new drive in the vertical mounting position, you should follow all of the steps in this section. If you are reinstalling a drive that you previously removed from this position, see “Installing the Drive,” on page B-13.

Removing the Mounting Frames From the Drive

Your hard disk drive comes with 5 ‘/+inch mounting frames attached to each side of the hard disk drive, as shown below.

B-8 Installing and Removing Disk Drives