Installing the Utility

The SETVGA utility is in the UTILS directory on the Utility 1 diskette. To install the utility, follow these steps:

1.If you do not already have a directory for utility programs, create a directory on your hard disk for SETVGA. (See your MS-DOS Reference Manual for information on creating directories.)

2.Insert the Utility 1 diskette in drive A and copy the program from the Utility 1 diskette to your utilities directory.

For example, if you created a directory called SET, you would type the following and press Enter to copy the program:

COPY A:\UTILS\SETVGA.EXE C:\SET\

Adding SETVGA to the AUTOEXEC.BAT file

For convenience in accessing SETVGA, include a pathname in your AUTOEXEC.BAT file. Follow these steps:

1.At the MS-DOS command prompt in the root directory, type the following and press Enter:

COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT

2.To set the path for the SETVGA utility, type the following and press Enter:

PATH C:\pathname\

Using the VGA Utilities A-41