6.Gently push down on the SIMM and, at the same time, turn the top of the SIMM to the left until the SIMM is vertical and snaps into place between the tabs and the retaining posts.
If the SIMM does not go in smoothly, do not force
Make sure the SIMM is fully inserted into the socket and that the pins on the retaining posts protrude through the holes in both ends of the SIMM.
7.Repeat steps 5 and 6 for each SIMM you want to install.
8.Replace any option card(s) you may have removed to access the SIMM sockets. See “Installing an Option Card,” on page
Installing and Removing Options |