2.To select Hard disk drive, press Enter. You see a menu such as the following:
| Drive | 1: | Type 17 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
| Number | of | cylinders | 977 |
|
|
|
| |
| Number |
| of | heads | 5 | Number | of | heads | 0 |
| Number |
| of | sectors | 17 | Number | of | sectors | 0 |
| Precomp. cylinder | 300 |
|
|
|
| |||
| Landing | zone | 977 | Landing zone | 0 | ||||
| Total | capacity (MB) | 40.5 | Total | capacity (MB) | .0 | |||
|
|
|
|
|
|
|
|
|
|
The submenu lists the settings you can change for each drive: the number of cylinders, the number of read/write heads, the number of sectors, the precompensation cylinder, and the landing zone (the cylinder on which you park the heads when moving the computer). It also displays the total storage capacity in megabytes.
3.If you want to change the settings for drive 1 (which is drive C on most computers), press Enter to highlight Drive 1:. If you want to change the settings for drive 2, press Enter and then + to highlight Drive 2:.
4.Press Enter. You see this submenu:
None
Type 17
User defined
5.If you have disconnected the drive or if the drive does not exist, highlight None and press Enter. All the drive settings become 0. Go to step 8.
Running the Setup Program