Resuming From an Error
If an error occurs during a test, the test stops at that point, and an error code and error message appear. If you want to record the problem, you can print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s) ? (Y/N)
To continue without printing the error message, select N.
Before you request a printout, be sure your printer is ready and contains paper. Then select Y. If the printer is not ready, the following message and prompt appear:
Printer is not installed correctly. Install correctly before entering. Continue ? (Y/N)
Correct the problem and select Y to continue printing, or select
Nto cancel printing.
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to
return to the menu.
The program continues after an error in one of the following ways:
Cl It returns to the Device List, or
Cl If you are running multiple tests and are not terminating on an error, the program repeats the test that caused the error.