Type the following in uppercase letters and press Enter:
GEM- DRIVRPK
4.Insert the Utility 1 diskette and log onto drive A. Type the following and press Enter:
COPY \GEM3\GEMVDI.EXE B:
The screen displays the message below:
Insert diskette for drive B: and press any key when ready
Note
This description assumes that you are using a computer with only one diskette drive. If you have two diskette drives, the computer copies from drive A to B without prompting you to remove either diskette.
5.Remove the Utility 1 diskette, insert the blank formatted diskette, and press any key. The screen displays the message below:
Insert diskette for drive A: and press any key when ready
6.Remove the formatted diskette and insert the Utility 1 diskette again. When you see the
COPY \GEM3\MDGEM8.SYS B:
The screen displays the message below:
Insert diskette for drive B: and press any key when ready
Using the VGA Utilities