Note

This description assumes that you are using a Computer with only one diskette drive. If you have two diskette drives the computer copies from drive A to B without prompting you to remove either diskette.

5.Remove the Utility 1 diskette, insert the blank formatted diskette, and press any key. The screen displays the message below:

Insert diskette for drive A: and press any key when ready

6.Remove the formatted diskette and insert the Utility 1 diskette again. When you see the MS-DOS prompt, type the following and press Enter:

COPY \GEM2\GEMSETUP.TXT B:

The screen displays the message below:

Insert diskette for drive B: and press any key when ready

7.Remove the Utility 1 diskette, insert the formatted diskette, and press any key. The screen displays this message:

Insert diskette for drive A: and press any key when ready

8.Remove the formatted diskette and insert the Utility 1 diskette again. When you see the MS-DOS prompt, type the following and press Enter:

COPY \GEM2\*.SYS B:

A-18 Using the VGA Utilities