Note

You may not want to use the copy-protected programs. See

in Chapter 4 for more information.

This section describes how to set the processor speed in the Setup program. You can also change the speed using keyboard commands or by running the ESPEED program. See “Changing the Processor Speed” in Chapter 4 for more details.

Follow these steps to set your processor speed:

1.At the main Setup menu, highlight Processor speed. The current status appears:

Speed: High

If the displayed setting is correct, skip this section.

2.To change the processor speed, press Enter. The cursor moves into the submenu and you see:

High

A u t o m a t i c

Low

(High is 16 MHz-, 16 MHz; simulates 8 MHz; and automatic tells the computer to switch from high to low when accessing a diskette drive.)

3.Press Enter to move the cursor block into the option menu.

4.Use T or 1 to highlight the speed you want and press Enter.

5.Highlight * * SAVE SETTING ** and press Enter to return to the main Setup menu.

2-12Running the Setup Program