You can install the driver automatically each time you turn on or reset your computer by placing the command in your AUTOEXEC.BAT file. To modify the AUTOEXEC.BAT file to load the 800 x 600, 16-color graphics driver, follow these steps:

1.Type C : \ and press Enter to log onto the root directory of your hard disk.

2.Type the following and press Enter:

COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT

3.Type R4V1600 and press Enter.

4.Press F6 and then Enter.

Configuring AutoCAD

The first time you use AutoCAD with the driver, you need to configure AutoCAD for an ADI display.

1. Select Configure AutoCAD from the AutoCAD main menu.

2. After you see the current configuration (if any), select C o n f i g u r e v i d e o d i s p l a y .

3.Select ADI display v4.0 as your new driver. (The menu indicates that this is installed at interrupt 7A hex.)

4.Save the new configuration and return to the main menu.

Using the VGA Utilities A-15