1.At the main Setup menu, highlight Display. You see the current display adapter type, such as the following:

I

VGA I

If the display adapter type is correct for your system, you can skip this section.

2.To change the display adapter setting, press Enter. The cursor block moves into the submenu and you see:

CGA 40 column

CGA 80 column

Monochrome 80 column

EGA,MCGA,VGA or other

3.Press Enter to move the cursor block into this submenu and then use t or L to highlight the option that matches your display adapter type. If you are not sure which one to choose, follow these guidelines:

Ll If you are using the built-in VGA adapter or have installed a VGA, EGA, or MCGA card, select EGA, MCGA, VGA or other.

tl If you have a color graphics adapter (CGA) or a multi- mode graphics adapter (MGA) attached to an RGB (color) monitor, select CGA 80 column. (Also set the color/mono switch on the MGA card to color.)

Running the Setup Program 2-7