2. Press Enter to move the cursor block into the submenu.

3. To set or change the time, press Enter again. You see this prompt:

(“hh” stands for hours, “mm” stands for minutes, and “ss” stands for seconds.)

4. Using a 24-hour time period, enter the time in the exact format shown in the box. Type two digits for each part; the Setup program automatically inserts the colons ( : ). For example, to set the time to 1:30 p.m., you would type the following:

1 3 3 0 0 0

You can use the backspace key to make corrections.

Note

If you want to use the number keys on the numeric keypad to enter the time or date, press Num Lock to enable Num Lock mode. The Num Lock light is on when Num Lock is enabled.

If you enter an invalid time-for example, a number greater than 23 for the hours or greater than 59 for the minutes or seconds-the computer beeps and ignores your entry. Try again.

When the time is correct, press Enter.

2-16 Running the Setup Program