2.Press Enter to move the cursor block into the submenu. You see:

3.If you want to change the serial port setting, be sure Serial is highlighted and press Enter. If you want to change the parallel port setting, highlight P a r a l l e l and press Enter. The cursor block moves into the submenu.

4.Use L or T to highlight the appropriate setting for the port you selected and press Enter. The screen displays the new setting.

Note

If you add an option card with a parallel or serial port and highlight a setting that causes a conflict between your built-in ports and the port on the option card, you see this message:

Conflict with option card

Highlight a setting that is appropriate for your system’ configuration and press Enter.

If you want to change the setting for the other port, return to step 3.

5.When the serial and parallel port settings are correct, highlight *** SAVE SETTINGS *** and press Enter. The cursor block returns to the main Setup menu and you see your updated serial and parallel interface settings.

Running the Setup Program 2-29