a. Tilt up the front panel until the clips on the top of the panel touch the computer. Then push on the top of the panel until it clicks into place. Your diskette drive(s) should be flush with the front of the panel.
9.Follow the steps under “Replacing the Cover,” in Chapter 5, to replace the cover on the computer. Then see “Post- installation Setup," later in Chapter 5, for instructions on configuring your computer for use with your new hard disk drive.
Note
After you change your computer’s drive configuration, the computer may take up to five minutes to
diagnostics the next time you turn it on.
Installing and Removing Disk Drives |