7.Secure the end of the card to the back of the computer with the retaining screw and washer.

8 &1

8.Follow the instructions at the end of this chapter to replace the cover. Then, if you have installed a memory card, see “Post-installation Setup for Memory Cards,” following that section. If you have installed any other type of option card, see “Post-installation Setup” after you replace the cover.

Removing an Option Card

If you need to remove an option card, follow these steps:

1.First, remove the cover from the computer. See “Removing the Cover,” on page 5-2, for instructions.

2.Remove the screw securing the card to the back of the computer and pull the card straight up and out of the slot. Either set the card aside by placing it gently on a soft surface with the component side facing up or carefully wrap the card, preferably with the original packing materials, and place it inside its box for safe storage.

5-16Installing and Removing Options