To reset the computer, MS-DOS must be either on the hard disk or on a diskette in drive A; so if your computer does not have a hard disk, insert the Startup diskette in drive A.

There are two ways to reset the computer:

0If you are using MS-DOS, hold down Ctrl and Alt and press the Del key. The screen goes blank for a moment and then the computer should reload MS-DOS. If it doesn’t, try the next method.

0Press the RESET button on the front panel. This method works even when the computer does not respond to your keyboard entries.

If resetting the computer does not correct the problem, you probably need to turn it off and reboot it. Remove any diskette(s) from the diskette drive(s). Turn off the computer and wait five seconds. If your computer does not have a hard disk, insert the Startup diskette in drive A. Then turn on the computer.

3-6 Using Your Computer