Follow these steps to run HDSIT:
1.Exit any program you are using and make sure the
2.Insert the Reference diskette in drive A.
3.Type the following and press Enter:
A:HDSIT
You see a message on the screen that tells you the disk drive’s read/write heads will remain locked until you reset the computer or turn the power off and on again. The computer locks the heads and disables the keyboard. Remove the Reference diskette and turn off the computer. You are now ready to move it to the new location.
If your computer came with a 5 l/&ich diskette drive, and you still have the original diskette drive protector card, you may want to insert it into the drive prior to shipping your computer. This is simply an added precaution you can take to protect the read/write heads.
Using Your Computer