Make sure the cable connector fits properly onto the drive interface and then push the connector onto the interface.
Caution
If you do not correctly align the connector, you could
severely damage your diskette drive when you push it in.
If you removed a hard disk drive from the vertical mounting position, go to step 6. If you did not, go to step 8 for instructions on connecting the power cable.
6.Locate the hard disk drive ribbon cable that you removed from the drive in the vertical mounting position. Follow the instructions below to connect the middle connector on this cable to the vertically mounted drive.
As shown in the illustration below, there are two rows of holes in the middle connector. One of the holes is blocked with a plastic plug.
‘blocked hole