If you have never set the real-time clock, the entry at the top of the screen flashes to remind you to set the time and date. See “Setting the Real-time Clock,” above, for instructions.

To view the last Setup summary screen, press PgDn. You see your hard disk drive configuration(s):

 

Hard disk

drive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drive 1:

Type 17

 

 

Drive 2:

None

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Number

of

cylinders

977

 

Number

of

cylinders

0

 

 

Number

of

heads

5

 

Number

of

heads

0

 

 

Number

of

sectors

17

 

Number

of

sectors

0

 

 

Precomp.

cylinder

300

 

Precomp. cylinder

0

 

 

Landing zone

977

 

Landing

zone

0

 

 

Total

capacity (MB)

40.5

,

Total capacity (MB) .0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check each Setup summary screen to see if all the information is correct. You can press PgUp to display the previous screen or PgDn to display the next screen.

If anything is incorrect, be sure Change settings is highlighted and press Enter. The main Setup menu appears and you can change the appropriate settings.

Leaving the Setup Menu

If you did not change any settings or you want to cancel the changes you made, highlight Exit without saving at a Setup summary screen and press Enter. The Operation Menu appears. Press 0 and Enter to exit. (If you changed the time or date, the new setting takes effect even if you exit the Setup program without saving your changes.)

Running the Setup Program 2-31