Configuring AutoShade

If you have AutoShade, the first time you use it with the driver, you need to configure AutoShade for an ADI display. Follow the steps below:

1.Before you run the AutoShade program, remove the file SHADE.CFG from the AutoCAD directory on your hard disk. (You can use the DEL or ERASE command; see your MS-DOS Reference Manual.)

2.Start AutoShade.

3.The program asks for a display and rendering driver. Select ADI for both drivers and indicate that you have a dual display system.

4.When you exit from the AutoShade program, it creates a new SHADE.CFG file.

Digital Research GEM, Version 2.2

Epson provides drivers for GEM for the following resolutions:

LI 640 x 480 16-color graphics

CI 800 x 600 16-color graphics.

Installing the Drivers

Follow the steps below to install the display drivers. If you have already installed GEM 2.2 on your computer, go to step 2 to install the GEM driver. If you have not yet installed GEM 2.2, begin with step 1.

A-16 Using the VGA Utilities