6.Replace any option card(s) you may have removed to access the socket. See “Installing an Option Card,” on page 5-10, for instructions.

7.Follow the steps under “Replacing the Cover,” on page

5-34. Then see “Post-installation Setup,” following that section, for instructions on configuring your computer for use with your math coprocessor.

Removing a Math Coprocessor

If you need to remove a math coprocessor from your computer, contact your dealer for assistance. You need a special extracting tool to remove the coprocessor without damaging it. Do not attempt to remove it without this tool because you can easily damage it.

Once it has been removed, run the Setup program on your Reference diskette to configure your system for use without a math coprocessor. See Chapter 2 for instructions.

Installing and Removing Options

5-33