2.There are two holes on each side of the disk drive. When you insert the drive, you align the appropriate round holes in the drive with the oval holes on the side of the drive bay, as shown below.
3.Insert the drive into the lower drive bay and slide it toward the back of the subassembly. Watch the oval holes on the side of the drive bay so you can see when the holes on the drive are positioned in the middle of the oval holes on the subassembly.
If you are installing a diskette drive, adjust its position so that the front of the drive lines up with the drive in the upper bay. (A hard disk drive fits all the way into the drive bay.)
Installing and Removing Disk Drives |