6.To rename the WS.COM file to WS132.COM, type the following and press Enter:

REN WS.COM WS132.COM

7.To rename the WSORIG.COM file to WS.COM, type the following and press Enter:

REN WSORIG.COM WS.COM

Running WordStar 3.3

To run WordStar 3.3 in 132 columns, you must specify

132-column text mode prior to starting WordStar. To do this, install and use the VGAMODE program. (See “VGAMODE Utility Program,” later in this appendix, for instructions on installing VGAMODE.) After installing VGAMODE, follow these steps:

1.Type the following and press Enter to specify 132-column text mode:

VGAMODE 132, 25

2.Type the following command and press Enter to start WordStar:

WS132

After you exit WordStar, if you want to return to 80-column mode, type the following and press Enter:

VGAMODE 80, 25

A-32 Using the VGA Utilities