Ventura Publisher, Version 2.0

Epson includes a driver for Ventura Publisher 2.0 to provide an 800 x 600, 2-color graphics resolution.

Installing the Drivers

Follow the instructions below to install the display driver. If you have already installed Ventura Publisher 2.0, go to step 2 to install the Ventura driver. If you have not yet installed Ventura Publisher 2.0, begin with step 1.

1.Use the documentation for Ventura Publisher to install the program.

2.After you complete the Ventura Publisher installation, insert the Utility 1 diskette in drive A.

3.Create a temporary directory called VENTEMP on your hard disk. At the MS-DOS prompt, type the following and press Enter:

MD VENTEMP

4.To copy all the files from the VEN2 directory on your Utility 1 diskette to the VENTEMP directory on your hard disk, type the following and press Enter:

COPY A:\VEN2\*.* C:\VENTEMP\*.*

5.Remove the Utility 1 diskette.

6.Use the Epson MENU utility or the MS-DOS FORMAT command to format a blank diskette. (See your MS-DOS Reference Manual for instructions.)

Using the VGA Utilities A-25