3.Create a temporary directory called VENTEMP on your hard disk. At the MS-DOS prompt, type the following and press Enter:

MD VENTEMP

4.To copy all the files from the VEN1 directory on your Utility 1 diskette into the VENTEMP directory on your hard disk, type the following and press Enter:

COPY A:\VEN1\*.* C:\VENTEMP\*.*

5.Remove the Utility 1 diskette.

6.Use the Epson MENU utility or the MS-DOS FORMAT command to format a blank diskette. (See your MS-DOS Reference Manual for instructions.)

7.Insert the blank, formatted diskette and log onto the VENTEMP directory. Then type the following and press

Enter:

COPY *.* A:

8.Log onto drive A.

9.If you are using Ventura Publisher, version 1.0, type the following and press Enter:

VPDRIVER

If you are using Ventura Publisher, version 1.1, type the following and press Enter:

VPDRVl-1

10.Select either VGA (640 x 480) or VGA (800 x 600) and continue the installation procedure according to the instructions on the screen.

A-24 Using the VGA Utilities