poweron(8)
System Administration 117
"y" to the prompt.
EXAMPLE 4 Turns on power to domains with domain IDs 1. Automatically replies with
"y" without displaying the prompt.
EXIT STATUS The following exit values are returned:
SEE ALSO poweroff(8), reset(8), showdomainstatus(8)
XSCF> poweron -y -d 0
DomainIDs to power on:00
Continue? [y|n]:y
00:Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs power".
XSCF>
XSCF> poweron -q -y -d 1
0Successful completion.
>0 An error occurred.