showdevices(8)
System Administration 369
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
■The showdevices(8) command will succeed only if the following Solaris Service
Management Facility (SMF) services are active on that domain:
■Domain SP Communication Protocol (dscp)
■Domain Configuration Server (dcs)
■Sun Cryptographic Key Management Daemon (sckmd)
■The showdevices(8) command displays a complete list of devices when
executed right after a Solaris OS boot or a DR operation. However, when
executed at other times, showdevices does not display a complete list if the
Solaris OS has unloaded drivers for any unused devices. To be certain the
displayed list is complete, run the devfsadm command with -v option on the
domain before running showdevices. For more information about the devfsadm
command, see the Solaris devfsadm(1M) man page.
EXAMPLES EXAMPLE 1 Displays the information of the physical devices configured on the XSB#00-0
-p force Predicts system resources deleted from the Solaris OS when an
XSB is forcibly disconnected by "deleteboard -f" command. If
the -p option is omitted, "-p bydevice" is used.
-p query Predicts system resources deleted from the Solaris OS when an
XSB is disconnected by deleteboard command. If the -p option
is omitted, "-p bydevice" is used.
-v Displays information on all I/O devices, including those that are
not management targets. As information on the I/O devices that
are not management targets, however, only physical
configurations are displayed, and resources and use states are not
displayed.
xsb Specifies the XSB number for which information is to be
displayed. The following xsb form is accepted:
x–y
where:
xAn integer from 00–15.
yAn integer from 0–3.