applynetwork(8)
System Administration 25
EXAMPLE 2 Applies the information that has been set for the XSCF network, on M3000/
M4000/M5000 servers. Automatically answers "y" to all prompts.
IP address :
netmask :
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
XSCF> applynetwork -y
The following network settings will be applied:
xscf#0 hostname :hostname-0
DNS domain name :example.com
nameserver :10.23.4.3
interface :xscf#0-lan#0
status :up
IP address :10.24.144.214
netmask :255.255.255.0
route :-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the network settings.