showenvironment(8)
System Administration 387
NAME showenvironment - display the airflow volume, intake air temperature and
humidity, temperature sensor, voltage sensor, fan speed, and power consumption
information in the server
SYNOPSIS showenvironment [-M] [ type]
showenvironment -h
DESCRIPTION showenvironment(8) command displays the information listed below.
The following types of the information are displayed:
Privileges You must have one of the following privileges to run this command:
useradm, platadm, platop, fieldeng
Refer to setprivileges(8) for more information.
Exhaust air
information
Amount of exhaust air from the server
Display of exhaust air information is supported only on the
M3000/M8000/M9000 servers.
Environment
information
Intake temperature and humidity of the system
Humidity is supported only on the M8000/M9000 servers.
Temperature
information
Intake temperature of the system and exhaust temperature of
each component
You can check the exhaust temperature of the following
components.
M3000 server motherboard unit(MBU_A), CPU
M4000/M5000 servers CPU module(CPUM), I/O
unit(IOU)
M8000/M9000 servers CPU/memory board unit(CMU),
CPU module(CPUM), crossbar
unit(XBU_B)
Volt a g e
information
Voltage sensor value
Fan speed
information
Fan rotational state and revolutions per unit of time
Power
consumption
information
Maximum and actual power consumption values
The power consumption information is supported only on the
M3000 server.