showarchiving(8)
System Administration 325
NAME showarchiving - display log archiving configuration and status
SYNOPSIS showarchiving
showarchiving [-e] [-v]
showarchiving -h
DESCRIPTION showarchiving(8) displays the status and configuration information for log
archiving on the Service Processor.
Privileges You m ust h ave platadm, platop or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
If the -e option is not specified, showarchiving displays the following
information:
1. A list of archiving configuration data:
-e Displays information about the last ten archiving errors.
-h Displays usage statement.
When used with other options or operands, an error occurs.
-v Specifies verbose output.
Archiving state Log archiving is enabled or disabled.
Archive host The host on which the logs are archived. Initial
value is Not configured. Possible values are
a host name or IPv4 address.
Archive directory The directory on the archive host where the
archives are stored. Initial value is Not
configured.