showcodusage(8)
348 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised July 2010
EXTENDED
DESCRIPTION
The showcodusage -p resource command displays the following COD usage
information for the system:
The showcodusage -p domain command displays the following COD usage
information for each domain:
Resource Identifies the type of COD resources available (processors).
In Use Specifies the number of COD CPUs currently used in the
system.
Installed Specifies the number of COD CPUs installed in the system.
COD Permitted Specifies the number of COD permits installed.
Status Specifies one of the following COD attributes:
OK Indicates that there are sufficient permits
for the COD CPUs in use. Also displays
the number of remaining COD resources
available and the number of any instant
access CPUs (headroom) available.
HEADROOM The number of instant access COD CPUs
in use.
Violation Indicates a COD permit violation exists.
Displays the number of COD CPUs in use
that exceeds the number of COD permits
available. This situation can occur when
you force the deletion of a COD key from
the COD Hardware Activation database,
but the COD CPU associated with the key
is still in use.
Domain/Resource Identifies COD resource (processor) for each domain. An
Unused processor is a COD CPU that has not yet been
assigned to a domain.
In Use Specifies the number of COD CPUs currently used in the
domain.