rebootxscf(8)
System Administration 123
NAME rebootxscf - rese t the XSCF
SYNOPSIS rebootxscf [ [-q] -{y|n}]
rebootxscf -h
DESCRIPTION The rebootxscf(8) command resets the XSCF.
The settings configured by using the following commands will be applied to XSCF
after you reset XSCF by using the rebootxscf(8) command.
■applynetwork(8)
■setaltitude(8)
■setdualpowerfeed(8)
■sethttps(8)
■setntp(8)
■setssh(8)
■settelnet(8)
In the M8000/M9000 servers, both of the active XSCF and the standby XSCF will be
reset.
Privileges You m ust h ave platadm or fieldeng privilege to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
■When the command is executed, a prompt to confirm execution of the command
is displayed. Enter "y" to execute the command or "n" to cancel the command.
■The rebootxscf(8) command terminates all connection to XSCF, such as telnet
or ssh.
■When you cancel the XSCF reset using the setdate(8) which commands reset
XSCF automatically, even if you perform this command, the information that is
set is not applied in XSCF.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-n Automatically answers "n" (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-y Automatically answers "y" (yes) to all prompts.