rebootxscf(8)
124 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
■By using the rebootxscf(8) command, you can reset XSCF while the domain is
in operation. However, if you set up XSCF to serve as the upper NTP server of
the domain, time lag may arise between XSCF and the domain. In such a case,
adjust the domain time so that XSCF and the domain will be synchronized.
EXAMPLES EXAMPLE 1 Resets the XSCF.
EXAMPLE 2 Resets the XSCF. Automatically replies with "y" to the prompt.
EXAMPLE 3 Resets the XSCF. Automatically replies with "y" without displaying the
prompt.
EXAMPLE 4 Cancels the rebootxscf(8) command execution that is in progress.
EXIT STATUS The following exit values are returned:
SEE ALSO ap plynetwork(8), setaltitude(8), setdualpowerfeed(8), sethttps(8), setntp(8),
setssh(8), settelnet(8)
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n]:y
XSCF> rebootxscf -y
The XSCF will be reset. Continue? [y|n]:y
XSCF> rebootxscf -q -y
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n]:n
XSCF>
0Successful completion.
>0 An error occurred.