showldapssl(8)
416 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
OPERANDS The following operands are supported:
EXAMPLES EXAMPLE 1 Displays the current state of LDAP/SSL.
EXAMPLE 2 Displays certificate information for the Primary server.
-C Appends to end of output the number of records in the log.
-E Specifies the last record number to display, where
end_record_number can be any record number in the log. Use -C
to obtain the number of records in the log.
-M Displays text by page, like the more(1) command does.
-S Specifies the first record to display, where start_record_number
can be any record number in the log. Use -C to obtain the
number of records in the log.
cert Display current server certificates.
log Display diagnostic messages.
group administrator Display current group configurations.
group operator Display current group configurations.
group custom Display current group configurations.
userdomain Display current userdomain settings.
usermap Display current user mapping settings.
defaultrole Display current defaultrole setting.
server Display current LDAP/SSL server settings.
XSCF> showldapssl
usermapmode: enabled
state: enabled
strictcertmode: enabled
timeout: 4
XSCF> showldapssl cert
Primary Server:
certstatus = certificate present
issuer = C=US, ST=California, L=San Diego, O=aCompany,
OU=System Group, CN=John User serial number = 0 (00000000)
subject = C=US, ST=California, L=San Diego, O=aCompany,
OU=System Group, CN=John User serial number = 0 (00000000)