addcodlicense(8)
System Administration 15
NAME addcodlicense - add a Capacity on Demand (COD) right-to-use (RTU) license key to
the COD license database
SYNOPSIS addcodlicense license-signature
addcodlicense -h
DESCRIPTION addcodlicense(8) adds the COD RTU specified license key to the COD license
database on the Service Processor.
The addcodlicense(8) command is not available on the M3000 server.
When the license key is added, the quantity of headroom is reduced by the quantity
provided by the license key. The quantity of headroom cannot be lower than 0.
Note – Before you run this command, you must obtain a COD license key. To
obtain a license key, contact your sales representative. For details on COD RTU
license keys, refer to the SPARC Enterprise M4000/M5000/M8000/M9000 Capacity on
Demand (COD) User’s Guide.
Privileges You mu st h ave platadm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
OPERANDS The following operands are supported:
EXAMPLES EXAMPLE 1 Adding a COD RTU License Key
EXIT STATUS The following exit values are returned:
-h Displays usage statement.
When used with other options or operands, an error occurs.
license-signature Specifies the COD RTU license key to be added to the COD
license database.
XSCF> addcodlicense \
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
0Successful completion.
>0 An error occurred.