showad(8)
System Administration 319
NAME showad - show Active Directory configuration and messages
SYNOPSIS showad
showad cert [-v] [-i n]
showad log [-M] [-C] [-S start_record_number] [-E end_record_number]
showad log -f
showad group administrator [-i n]
showad group operator [-i n]
showad group custom [-i n]
showad userdomain [-i n]
showad dnslocatorquery [-i n]
showad defaultrole
showad server [-i n]
showad -h
DESCRIPTION showad(8) displays Active Directory configuration and diagnostic messages.
Privileges You m ust h ave useradm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-f Displays diagnostic messages in real time. When this option is
used, the command does not terminate. Each diagnostic message
is displayed when it is registered. To stop the real-time display,
press Ctrl-C.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-i nSets an index marker, value 1 - 5. When executed without -i, or
with -i and no value, showad walks sequentially through items
1 through 5. Exceptions: When used without -i, the command
showad cert displays the certificate information for the
Primary server, and showad server displays the Primary
server configuration.
-v Specifies verbose output. Used only with the cert operand to
display the full certificate.