setsunmc(8)
300 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007
OPERANDS The following operands are supported. The operands cannot be used together with
the options.
EXAMPLES EXAMPLE 1 Basic Setup Command With Arguments
EXAMPLE 2 Starting the Agent
EXIT STATUS No exit values are returned.
SEE ALSO sho wsunmc(8)
-s server Specifies the Sun Management Center server with which the
agent will be communicating. The server can be specified
using either a host name or an IP address. It must be set
prior to enabling the agent.
-t trap_port Specifies the port on the Sun Management Center server to
which traps are sent. The default value is 162.
-z seed Specifies the seed to generate a security key for
communication between Sun Management Center server
and agent. This value must be the same as the seed used on
the server setup. It must be set prior to enabling the agent.
enable When invoked with the operand enable, setsunmc activates
the Sun Management Center agent. This means the Sun
Management Center agent is started, and the startup daemon is
notified to start the agent on subsequent reboots.
disable When invoked with the operand disable, setsunmc stops the
agent, and the startup daemon is notified to disable starting of
the agent on subsequent reboots.
XSCF> setsunmc -s balon -z maplesyr -c double_secret
XSCF> setsunmc enable