setsnmp(8)
System Administration 279
NAME setsnmp - manage the SNMP agent
SYNOPSIS setsnmp enable [ mib_name]
setsnmp disable [ mib_name]
setsnmp addtraphost -t type -s community-string [-p trap-port] traphost
setsnmp remtraphost -t type traphost
setsnmp addv3traphost -u username -r authentication-protocol {-n
engine_id|-i} [ -a authentication-password] [ -e encryption-password] [-p trap-port
] traphost
setsnmp remv3traphost -u username traphost
setsnmp enablev1v2c read-only-community-string
setsnmp disablev1v2c
setsnmp [-l system-location] [-c system-contact] [-d system-description] [-p agent-
port]
setsnmp default
setsnmp -h
DESCRIPTION setsnmp(8) enables or disables the SNMP agent, as well as configures the SNMP
agent settings.
Privileges You m ust h ave platadm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-c system-contact Specifies the system contact information for the agent.
-d system-description Specifies the system description for the agent.
-h Displays usage statement.
When used with other options or operands, an error
occurs.