showdomainstatus(8)
378 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported.
EXAMPLES EXAMPLE 1 Displays status information on all domains.
EXIT STATUS The following exit values are returned:
SEE ALSO po weroff(8), poweron(8), reset(8), showdcl(8)
Can run this command for all domains.
domainadm, domainmgr, domainop
Can run this command only for your accessible domains.
-a Displays status information on all domains that can be accessed.
-d domain_id Specifies only one ID of the domain to be displayed. domain_id
can be 0–23 depending on the system configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 Running (Waiting for OS Shutdown)
02 Powered Off
03 Panic State
04 Shutdown Started
05 Booting/OpenBoot PROM prompt
06 Initialization Phase
07 OpenBoot Execution Completed
0Successful completion.
>0 An error occurred.